40T/H green sand casting line
Sanzhuji''s recent green sand casting turnkey project:
The 40T/H green sand casting production line adopts a vertical boxless molding machine, which is composed of a host machine, a pouring section and a cooling section. The production capacity is 200-300 moods/h. Two GS16-30 high-efficiency rotator mixers are used for green sand mixing. The sand mixing capacity of each sand mixer is 20T/H. A screw feeder is equipped above the sand mixer to complete the quantitative addition of pulverized coal and bentonite. A water pump is equipped at the bottom of the sand mixer to complete the quantitative addition of water, At the same time, a sampling window is set at the side of GS efficient rotator mixer to realize sampling inspection and measure the humidity, hardness and permeability of green sand. The mixed green sand is transported to the upper part of the vertical boxless molding machine through the sand conveying belt, and a sand loosening machine is equipped on the belt to ensure that the mixed green sand reaches the fluffy state. The sand shaker uses the conveyer shakeout and knockout barrel, and both are equipped with dust hoods to connect the dust remover, It can quickly remove dust and reduce dust in the old sand. At the same time, it is equipped with magnetic separator to remove and separate iron impurities in the old sand, so as to protect the whole casting production line from damage. Riddle screens clay blocks and sand blocks in the old sand. Multi cooler is equipped with a temperature measuring and humidifying device, which can be cooled by spraying water and equipped with a high-pressure fan to remove heat through blowing, The internal double disk can realize the function of premixing the old sand. The bucket elevator vertically lifts the old sand to the sand storage silo. The whole green sand casting workshop is equipped with two sets of dust removers, one for dust treatment in the process of recovering the old sand, and the other for dust removal in the pouring area and electric furnace area.
Qingdao Sanzhuji Equipment Manufacturing Co., Ltd. specializes in the production of Green Sand Molding Line,Self-hardening sand molding line,foundry machines,Sand molding machine,Sand casting equipment,sand mixer,GS high efficiency rotary mixer,Resin sand mixer,no-bake resin sand mixer,Jolt squeeze molding machine/Jolt-squeezing moulding machines,Multi- Piston Moulding Machine/Hydraulic multi-piston moulding machine,sand casting molding machine,sand reclamation equipment,foundry molding machine,flaskless moulding machine,shot blasting machine,dust collector,according to the amount of old sand recovered Carry out plan customization, and provide sand reclamation equipment installation, commissioning, and training. Welcome guests to visit the factory.